Description

Roket Card Glue 50ml bottle & applicator.

For the fast assembly of card models eg. railway buildings and rockets.

Also bonds balsa wood, paper and card to most plastics. Use sparingly, align and press parts together for an instant bond. Water clean up.

You don’t need to wait for Roket Card Glue to dry like you do with PVA before moving onto the next section. The glue comes with a fine nozzle which was very handy as you really only need a very small amount of glue with each application for it to bond.

To use the glue:

• unscrew the cap, there’s no need to cut off the top of the bottle as this is already done.
• Don’t squeeze the bottle, but instead run it along the edge you need to apply it to as it’s a fairly thin glue and goes a long way.
• Use the nozzle supplied with the bottle. It saves a lot of wastage and gives you a very fine line of glue.
• Hold the sections you need to glue together for roughly 5 seconds and it’s bonded.
• Leave for a few hours to fully dry out.
• If you need more precision then you can use the Pin Point Syringe Kit. This gives you needle fine tips and dispensing syringes.

You can find a full range of glues and hobby, model building accessories here.