Description

The Micro-Mesh JB6 Acrylic Cabin Window Restoral Kit is designed strictly for use on cabin windows, this kit will restore up to 90 square feet. Not meant for use on pilot or co-pilot windows.

The Micro-Mesh JB6 Acrylic Cabin Window Restoral Kit contains:

• 2400 3″ x 6″ Sheet, Micro-Mesh 2400 x 5
• 3600 3″ x 6″ Sheet, Micro-Mesh 3600 x 3
• 4000 3″ x 6″ Sheet, Micro-Mesh 4000 x 3
• 6000 3″ x 6″ Sheet, Micro-Mesh 6000 x 2
• 320 Sandpaper 3″ x 5 1/2″ Sheet x 2
• 400 Sandpaper 3″ x 5 1/2″ Sheet x 2
• 600 Sandpaper 3″ x 5 1/2″ Sheet x 2
• 3″ x 3″ Foam Sanding Block x 1
• 2 oz. Bottle Anti-Static Cream x 1
• 3″ x 3″ Cardboard Sheet x 1
• Flannel Cloth x 1
• Instructions

For more details on Micro-Mesh and it’s uses, click here.
Have a question or query? Contact Us

MICRO MESH THE NON ABRASIVE ABRASIVE

Conventional sandpaper is designed to be aggressive so that it will dig deeply. In its manufacture, the crystals are electrically charged so that they will stand up. They are locked into a hard resin and when applied to a surface it will literally tear in and remove the substrate of the material you are sanding. The crystals cut in a negative raking motion, leaving inconsistent scratch patterns.

Micro Mesh does the opposite:

• The backing is a long lasting cloth to which an ultra flexible cushioning layer is applied.
• This cushioning layer will determine how far you can push the crystals before they will penetrate the cushioning layer.
• On top of this layer, is a very resilient glue and not a hard resin, but a completely flexible glue that will hold the crystals while allowing it to move and rotate.
• The crystals can turn in any direction without coming loose.
• When you start to apply pressure to sand with Micro-Mesh, the crystals will go into the cushioning layer while beginning to cut a bit.
• If you push harder, they will go further into the cushioning layer, which serves as a safety valve.
• It determines how much pressure you can exert in a downward direction. Instead of a deep scratch that sandpaper makes, Micro-Mesh produce a refined scratch that is close to an RMS of 1.0.
• The cushioning layer also allows the crystals to cut with a planning motion that leaves an extremely consistent scratch pattern and allows you to achieve extraordinary levels of gloss.
• In conclusion, Where conventional abrasives will take surfaces down 2 or 3 thousandths (.002 or .003), Micro-Mesh™ will take it down one ten-thousandth (.0001) or less.